Fuel, Lubricants, and Coolant Converting From HY-GARD to BIO HY- Fill reservoir with BIO HY-GARD to appropriate level. Start engine and bring to medium idle. GARD Turn steering wheel full stroke several times and cycle cutting units several times. Systems...
More
Fuel, Lubricants, and Coolant Converting From HY-GARD to BIO HY- Fill reservoir with BIO HY-GARD to appropriate level. Start engine and bring to medium idle. GARD Turn steering wheel full stroke several times and cycle cutting units several times. Systems being converted from HY-GARD to BIO HY-GARD should Stop engine and check hydraulic oil level. Add BIO HY- follow the procedure listed below to obtain maximum lubricant GARD to appropriate level. biodegradability. Operate machine under normal operating conditions for a minimum of two hours. Park machine on a level surface. Repeat steps 1-8. Lower cutting units, stop engine, set park brake and Follow recommended maintenance schedules. remove key from ignition. Drain hydraulic reservoir. OUO1086,1000408-19-20120615 Replace hydraulic filter. Grease - North America The following John Deere greases are preferred for the cutting units and unit attachments: John Deere Golf and Turf Cutting Unit Grease. IMPORTANT: Avoid Damage! ONLY use a qual
Less
