Garrard 3000 Kit

Garrard 3000 cart kit – installation All installation and basic maintenance can be done with the record player unit in-situ NOTE: disconnect the player from mains Nomenclature power so you don't inadvertently start the platter spinning In this document we... More

Garrard 3000 cart kit – installation All installation and basic maintenance can be done with the record player unit in-situ NOTE: disconnect the player from mains Nomenclature power so you don't inadvertently start the platter spinning In this document we refer to the entire record player unit as the 'deck', and the part that the records sit on and spins as the 'platter'. See glossary for more TIP: keep any screws and brackets, they may To replace the cartridge be useful First remove the old cartridge. Undo the cartridge screws from under the headshell (photo 1) IMPORTANT: These screws are a soft-ish With the screws removed the cartridge will drop down, using small metal, so it's best to push hard and firm on pliers or tweezers or a tiny screwdriver CAREFULLY prise off the them and undo each in one go, if you are too tonearm wiring connectors from the back of the cartridge and remove weak with it there is a real chance you'll the old cartridge damage the head making removal extremely d Less