Ref: 1.00 Weltron BSR kit – installation instructions Accessing the Weltron record deck NOTE: if you wish to go a bit further and To perform all the work associated with this kit you simply need to lift service the under deck parts of your record off the...
More
Ref: 1.00 Weltron BSR kit – installation instructions Accessing the Weltron record deck NOTE: if you wish to go a bit further and To perform all the work associated with this kit you simply need to lift service the under deck parts of your record off the entire top cover and lid and place it in safe area, all installation player you must first remove the black and maintenance can be done with the record deck in-situ electrics cover from the Weltron lower body (remove 4 fixing screws and the main control knobs etc) and disconnect the 2 signal wires and power plug from the bottom of the deck. Remove the deck by turning the 2 transport To replace the cartridge clips into the vertical position (photo 19 A), First remove the rectangular finishing sticker (photo 1). There are 2 the deck can now just lift right out (don't replacement stickers in the kit, so if you are using a knife or forget when refitting to fold down those screwdriver err on the side of damaging the sticker rather than tran
Less
