TROUBLESHOOTING c-3 C-3 [E2:33] Disconnection in front pump TVC solenoid system is displayed [E2:37] Disconnection in rear pump TVC solenoid system is displayed * This troubleshooting is carried out when there is still an abnormality, so when disconnecting...
More
TROUBLESHOOTING c-3 C-3 [E2:33] Disconnection in front pump TVC solenoid system is displayed [E2:37] Disconnection in rear pump TVC solenoid system is displayed * This troubleshooting is carried out when there is still an abnormality, so when disconnecting the connector and inserting the T-adapter, or when removing the T-adapter and returning the connector to its original position, if the service code is not displayed, the problem has been removed. * If there is a disconnection in the solenoid or wiring harness, no current flows to the solenoid. If the No. 2 pin of the solenoid is short circuiting with the ground, the current (approx. 1 A) continues to flow to the solenoid. * If the starting switch is turned OFF after an abnormality occurs, turn the starting switch ON and check if E2:33 or E2:37 are displayed. (If they are not displayed, the problem has been removed.) * Always turn the TVC prolix switch OFF. * Before carrying out troubleshooting, check that all the related connectors a
Less
