Return to Master Table of Contents 8. Locate all clutches by means of Handles (S). (S) Handle (6 pieces needed) - 5870 260 010 Figure 233 9. Squeeze rectangular rings (7 pieces, see Arrows) in and hook them in. 10. Now, grease rectangular rings and align...
More
Return to Master Table of Contents 8. Locate all clutches by means of Handles (S). (S) Handle (6 pieces needed) - 5870 260 010 Figure 233 9. Squeeze rectangular rings (7 pieces, see Arrows) in and hook them in. 10. Now, grease rectangular rings and align them centrically. Figure 234 11. Tilt housing cover 180°. 12. Mount eye bolts, see Arrows. (S) 2x Eye bolt M20 - 0636 804 003 (S) lx Eye bolt M16 - 0636 804 001 (S) Puller device - 5870 000 017 Figure 235 13. Install adjusting screws (S). 14. Position housing cover by means of lifting device carefully on the gearbox housing until contact is obtained, reap. position the clutches in the gearbox housing. NOTE: Pay attention to the overlapping of the oil pipes with the bores in the housing cover. (S) Lifting chain - 5870 281 047 (S) Adjusting screws - 5870 204 007 Figure 236 Transmission (ZF 4WG130) S0607060 Page 135
Less
