UniGuard Technology Limited
www.uniguardgps.com
Below are step by step of vehicle fuel monitoring including installation and configuration. Please
choose the most convenient one for your fuel monitoring testing.
GPS Tracker must be setup to be tracked...
More
UniGuard Technology Limited
www.uniguardgps.com
Below are step by step of vehicle fuel monitoring including installation and configuration. Please
choose the most convenient one for your fuel monitoring testing.
GPS Tracker must be setup to be tracked online first.
ACC MUST BE ON WHEN EACH (SMS/GPRS) COMMAND IS SENT. Otherwise the reply is Failure.
Solution 1: Configuration via sending SMS commands from cell phone
1. Connect UT04 fuel check line to vehicle fuel own sensor line correctly. Check the First Step
here http://www.uniguardgps.com/Support/Faqs/21.html
2. Stop vehicle at a place with good signal. Go to dashboard to check how much fuel is left in
Percentage. If 80% fuel is left, TURN ON ACC, send command A000000,017,80 Tracker will reply a
message like (80,XX) XX is a measure value. It must be recorded.
3. Add or reduce fuel. If fuel then is 60% left, TRUN ON ACC, send command A000000,017,60
Tracker will reply a message like (80,XX) XX is a measure value. IT must be recorded.
4.
Less
