Aquapres
Product Identification
Hydraulic pressure curing unit
Package Contents
Intended Purpose
This product is intended for pressure curing acrylic
resin one case at a time.
Other Materials/Equipment Needed
Water
Instructions for Use
1.
Fill pot to...
More
Aquapres
Product Identification
Hydraulic pressure curing unit
Package Contents
Intended Purpose
This product is intended for pressure curing acrylic
resin one case at a time.
Other Materials/Equipment Needed
Water
Instructions for Use
1.
Fill pot to overflowing with room temperature
water.
Warning: very hot, or boiling water will cause
the plastic bowl to distort and become unusable.
2.
When acrylic has gelled, place it (while still on
model) into pot.
3.
Place cover on pot.
Slide covered pot into frame
until pot reaches pegs.
4.
Generate pressure by turning handle on top of unit
in a clockwise motion until 30 psi is generated.
5.
Allow acrylic to cure completely, per acrylic
instructions.
Pressure does not affect setting time.
6.
To open pot: Turn handle counterclockwise until
gauge shows no pressure.
Remove pot from frame
and place pot in sink.
Push down on the relief valve.
Remove lid.
Less
