© June 2005 TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 1
2
2.
ERROR CODE AND SELF-DIAGNOSTIC MODE
2.
1 Error Code List
2.
1.
1 Jam
The following error codes is displayed at the upper right of the screen when the CLEAR...
More
© June 2005 TOSHIBA TEC e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 1
2
2.
ERROR CODE AND SELF-DIAGNOSTIC MODE
2.
1 Error Code List
2.
1.
1 Jam
The following error codes is displayed at the upper right of the screen when the CLEAR PAPER or CALL
SERVICE symbol is blinking.
Error code Classification Contents Troubleshooting
E010 Paper exit jam Jam not reaching the exit sensor : The paper which
has passed through the fuser unit does not reach
the exit sensor.
P.
5-1
E020 Paper exit jam Stop jam at the exit sensor: The trailing edge of the
paper does not pass the exit sensor after its leading
edge has reached this sensor.
P.
5-2
E030 Other paper jam Power-ON jam: The paper is remaining on the
paper transport path when power is turned ON.
P.
5-18
E061 Incorrect paper size setting for upper drawer: The
size of paper in the 1st drawer differs from size setting of the equipment.
P.
5-18
E062 Incorrect paper size setting for lower drawer: The
size of paper in th
Less
