Field Service Ver. 1.0 Apr. 2010 17. JAM DISPLAY 563 bizhub 423/363/283/223 TROUBLESHOOTING TROUBLESHOOTING 17. JAM DISPLAY • When the paper jam occurred, the message, the position jam occurred (number blinks), position of the remaining paper (number lights...
More
Field Service Ver. 1.0 Apr. 2010 17. JAM DISPLAY 563 bizhub 423/363/283/223 TROUBLESHOOTING TROUBLESHOOTING 17. JAM DISPLAY • When the paper jam occurred, the message, the position jam occurred (number blinks), position of the remaining paper (number lights up), and the JAM code are displayed. NOTE • JAM code is displayed on the jam warning screen only when the following setting is set to “Display.” [Service Mode] → [System 2] → [JAM Code Display Setting] 17.1 List of JAM code A1UDF4E019DA JAM code JAM type Detection timing Misfeed processing location Ref. page 10-01 Manual bypass feed section • The leading edge of the paper does not unblocked or turn ON the tray 2 vertical transport sensor (PS28) even after the lapse of a given period of time after the manual bypass starts to feed paper. Right door P.580 10-40 • For paper fed from the manual bypass, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start
Less
