NEO 600-1000M-X Microinverter Quick installation Guide (LoRa) 1 . Overview 2. Installation 1.1 Microinverter Overview Step 1 Install the NEO Microinverter Step 2 Ground the system Position Description a. Mount the NEO Microinverter to the rail using the...
More
NEO 600-1000M-X Microinverter Quick installation Guide (LoRa) 1 . Overview 2. Installation 1.1 Microinverter Overview Step 1 Install the NEO Microinverter Step 2 Ground the system Position Description a. Mount the NEO Microinverter to the rail using the mounting screws recommended by a. The AC drop cable has an your module racking vendor. embedded earth wire, which A AC drop cable b. Maintain a minimum of 20 mm clearance between the roof and the back plate of the might be sufficient to ensure B Heat sink Microinverter to ensure ventilation and heat dissipation. Do not install the proper grounding. C Antenna Microinverter at the gap between the PV modules. b. In area with special grounding requirements, external D PV terminal 2 grounding may be needed by 128mm E LED grounding the screw hole on the handle. F Back plate G Handle 1 M6/M8 A B C D E F G H H Grounding hole Note: Mounting Torque 9N·M 1.This document is intended for use as a quick installation guide. For details, please refer t
Less
