I IV 4. Set network parameters 1. Preparation 4.1 Connect to home router by Click "Find AP"as shown below. There will be a scan page, it will search for the clicking "Find AP" or manually signal of WIFI router around. Signal 1.1 Confirm the inverter is...
More
I IV 4. Set network parameters 1. Preparation 4.1 Connect to home router by Click "Find AP"as shown below. There will be a scan page, it will search for the clicking "Find AP" or manually signal of WIFI router around. Signal 1.1 Confirm the inverter is working input home router’s SSID. means strength of the router.100% means WiFi Setting Guide properly.(the yellow light on the display is flashing) 4.2 Input password of home router the router has a good signal,0% means the router has no signal here. as "key". 1.2 Power home router on. Via computer or smartphone 4.3 Click "Save&Reboot". 1.3 Make sure the signal strength of router is strong. Note:The signal strength will be affected by barriers between inverter and home router. brick concrete xylon ferroconcrete steel plexiglas the influence to signal strength of different material walls ca.60-90% ca.80-95% ca.20-60% ca.0-10% ca.70-90% Note:Users need to make a copy of SN number for the future use in login the X-Monitoring system. II III V 2
Less