Garrard 6200 cartridge – installation Cartridge installation can be done with the record player unit in-situ NOTE: disconnect the player from mains Nomenclature power so you don't inadvertently start the In this document we refer to the entire record player...
More
Garrard 6200 cartridge – installation Cartridge installation can be done with the record player unit in-situ NOTE: disconnect the player from mains Nomenclature power so you don't inadvertently start the In this document we refer to the entire record player unit as the 'deck', platter spinning and the part that the records sit on and spins as the 'platter'. See glossary for more TIP: for the Garrard 6200 series it is actually To replace the old cartridge easier to work on the cartridge by half First release the old cartridge from its plastic clip by prising the front removing the tonearm. This is simply clip out a little then remove the old clip by undoing the single cartridge performed by undoing the tonearm screw and screw (photo 1A) washer (photo 2). carefully lift away the tonearm noting the wires will still be Using small pliers or tweezers or a tiny screwdriver CAREFULLY prise connected so don't apply excessive strain to off the tonearm wiring connectors from the back of the cart
Less