TROUBLE SHOOTING Q) My air jacks keep rising up by itself ? A) Dirt in the inlet valve CURE: 1) Undo the red valve assembly (nothing will fall inside jack cylinder) remove four (4) Allen cap screws. 2) Remove the inlet side brass fitting. 3) Push the inlet...
More
TROUBLE SHOOTING Q) My air jacks keep rising up by itself ? A) Dirt in the inlet valve CURE: 1) Undo the red valve assembly (nothing will fall inside jack cylinder) remove four (4) Allen cap screws. 2) Remove the inlet side brass fitting. 3) Push the inlet position out, check on the rubber seal, clean and grease. 4) After cleaning re-install, 4) Re-install 4.1) Inlet back 4.2) Spring 4.3) Brass fitting
Less