Common attributes: Positionning
The CSML language provides many different attributes for positioning...
From the center
| Attribute |
Description |
| horizontalCenter |
When set, if left or right is not set, the layout will be centered horizontally offset by the numeric value of this property. |
| percentHorizontalCenter |
When set, if left or right is not set, the layout will be centered horizontally offset by the value of this property multiplied by the containing width. A value of 0 represents 0% and 1 represents 100%. |
| minHorizontalCenter |
The minimum horizontal center location that can be applied through percentHorizontalCenter. |
| maxHorizontalCenter |
The maximum horizontal center location that can be applied through percentHorizontalCenter. |
| verticalCenter |
When set, if top or bottom is not set, the layout will be centered vertically offset by the numeric value of this property. |
| percentVerticalCenter |
When set, if top or bottom is not set, the layout will be centered vertically offset by the value of this multiplied by to the containing height. A value of 0 represents 0% and 1 represents 100%. |
| minVerticalCenter |
The minimum vertical center location that can be applied through percentVerticalCenter. |
| maxVerticalCenter |
The maximum vertical center location that can be applied through percentVerticalCenter. |
From the top
| Attribute |
Description |
| top |
When set, the top of the layout will be located offset from the top of it's container by the value of this property. |
| percentTop |
When set, the top of the layout will be located offset by the value of this property multiplied by the containing height. A value of 0 represents 0% and 1 represents 100%. |
| offsetTop |
Add additional offset to be added to the top value after it has been set. |
| minTop |
The minimum top location that can be applied to the layout boundaries. |
| maxTop |
The maximum top location that can be applied to the layout boundaries. |
From the bottom
| Attribute |
Description |
| bottom |
When set, the bottom of the layout will be located offset from the bottom of it's container by the value of this property. |
| percentBottom |
When set, the bottom of the layout will be located offset by the value of this property multiplied by the containing height. A value of 0 represents 0% and 1 represents 100%. |
| offsetBottom |
Add additional offset to be added to the bottom value after it has been set. |
| minBottom |
The minimum bottom location that can be applied to the layout boundaries. |
| maxBottom |
The maximum bottom location that can be applied to the layout boundaries. |
From the left
| Attribute |
Description |
| left |
When set, the left of the layout will be located offset by the value of this property multiplied by the containing width. |
| percentLeft |
When set, the left of the layout will be located offset by the value of this property multiplied by the containing width. A value of 0 represents 0% and 1 represents 100%. |
| offsetLeft |
Add additional offset to be added to the left value after it has been set. |
| minLeft |
The minimum left location that can be applied to the layout boundaries. |
| maxLeft |
The maximum left location that can be applied to the layout boundaries. |
From the right
| Attribute |
Description |
| right |
When set, the right of the layout will be located offset by the value of this property multiplied by the containing width. |
| percentRight |
When set, the right of the layout will be located offset by the value of this property multiplied by the containing width. A value of 0 represents 0% and 1 represents 100%. |
| offsetRight |
Add additional offset to be added to the right value after it has been set. |
| minRight |
The minimum right location that can be applied to the layout boundaries. |
| maxRight |
The maximum right location that can be applied to the layout boundaries. |
Absolute positionning
| Attribute |
Description |
| x |
Defines the x location (top left) of the layout boundary. Unlike left, x does not affect a layout's width. Once left (or percentLeft) is set, the x value no longer applies. If percentX exists when x is set, percentX will be overridden and be given a value of NaN. When a Layout is created for a display object, this is defined as the x location of that display object. The value of x itself cannot be NaN. |
| percentX |
When set, the x location of the layout will be located at the value of this property multiplied by the containing width. A value of 0 represents 0% and 1 represents 100%. |
| minX |
The minimum x location that can be applied to the layout boundaries. |
| maxX |
The maximum x location that can be applied to the layout boundaries. |
| y |
Defines the y location (top left) of the layout boundary. Unlike top, y does not affect a layout's height. Once top (or percentTop) is set, the y value no longer applies. If percentY exists when y is set, percentY will be overridden and be given a value of NaN. When a Layout is created for a display object, this is defined as the y location of that display object. The value of y itself cannot be NaN. |
| percentY |
When set, the y location of the layout will be located at the value of this property multiplied by the containing height. A value of 0 represents 0% and 1 represents 100%. |
| minY |
The minimum y location that can be applied to the layout boundaries. |
| maxY |
The maximum y location that can be applied to the layout boundaries. |
Scope
These attributes applies to the following statement:
